HP Envy dv7t-7200 RAM Replacement

ID: 100422

Description:

Steps:

1. Turn the power off and disconnect all cables and cords from the laptop.
2. Place the computer on its top on a flat surface with the hinges facing away from you.

3. Slide the battery release latch to the left which is located on the right-hand side of the battery.

4. Tilt the battery away from you and lift out.

5. Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.
6. This screw does not come out of the service cover completely once loosened.

7. Slide the service cover toward the front of the laptop.
8. Lift the service cover to remove it from the laptop.

9. Press down and away from the ram cards on the tabs surrounding the ram cards.

10. The first ram card will pop up, and now you will slide it out of its slot.

11. Repeat this process for the second ram card.