Hoover Power Path Pro Advanced Hose Replacement

ID: 103442

Description: The hose creates a pathway for water to flow...

Steps:

1. Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.
2. Lay the cleaner down horizontally with its wheels closest to the floor.

3. Hold the lower brush roll with both hands and pull outwards until it is detached.

4. Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
5. Remove the brush roller.

6. Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.
7. They will also be indicated on the bottom of the vacuum.

8. Pull the red handle shown to remove the front suction unit from the cleaner.

9. Unscrew the Phillips #2 screw at the bottom of the hose.

10. Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.