BEM Mojo 2 Charging Base Motherboard Replacement

ID: 105137

Description: The charging base motherboard may need to be...

Steps:

1. Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.

2. Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.

3. Pull the top cover off of the charging base to reveal the internal chip.
4. Use the plastic opening tool to pry the battery from the top cover.
5. Caution: Be careful when detaching battery from top cover as to not damage any of the wires attached to it.

6. Use the tweezers to carefully detach the wires from the internal chip.
7. Caution: Be careful to not damage the internal chip when removing the wires.

8. Use the tweezers to remove the red wire attached to the motherboard.

9. Use the plastic opening tool to carefully lift and remove the motherboard from the charging base.