Dell Inspiron 1122 M102z Display Assembly Replacement

ID: 106726

Description: In this guide, we will show you how to remove...

Steps:

  1. Follow the instructions in Before You Begin.
  2. Disconnect the Mini-Card antenna cables from the Mini-Card(s).
    3. Step image
  3. Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.
    4. Step image
  4. Disconnect the display cable from the system board connector.
    5. Step image
  5. Remove the two screws (one on each side) that secure the display assembly to the computer base.
    6. Step image
  6. Lift and remove the display assembly off the computer base.
    7. Step image
  7. Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
    8. Step image
  8. Connect the display cable to the system board connector.
    9. Step image
  9. Route the Mini-Card antenna cables through the routing guides on the computer base.
    10. Step image
  10. Connect the Mini-Card antenna cables to the Mini-Card(s).
    11. Step image
Back