RedOctane X-Plorer Pedal Input Replacement

ID: 108311

Description: The RJ-14 connector is designed to connect to...

Steps:

1. Remove the strap by pulling it off of the mounts located on the body and neck.

2. Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
3. Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
4. These screws can also be Torx on some models.
5. Pull off the rear case.

6. Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
7. Pull off the top shell of the neck to expose the internal features.

8. Remove the two 10mm Phillips #1 screws from the RJ-14 connector board.
9. Lift the RJ-14 connector to remove it from the case.