GoPro Karma Harness Replacement

ID: 109821

Description: Replacing the harness for the GoPro camera is...

Steps:

  1. Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
  2. Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.
    3. Step image Step image Step image
  3. Remove the stabilizer by pulling the entire stabilizer out of the drone body.
    4. Step image
  4. Place finger on the tab to open the harness and remove the camera.
  5. Be sure to pull the camera straight out lest you damage the connectors.
    6. Step image Step image Step image
  6. Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.
    7. Step image
  7. Pull the harness off of the stabilizer.
  8. Be sure to pull the harness straight off lest you damage the connector.
    9. Step image Step image Step image
Back