Garmin Fenix 3 GPS Antenna Replacement

ID: 113913

Description: If your GPS is failing to find your location,...

Steps:

1. Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.

2. Carefully lift the face off the watch base.
3. Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon.

4. Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.

5. Set the watch face aside.

6. Locate the antenna, which is located on the motherboard.

7. Carefully remove the antenna, and set it aside.