Blu Grand M2 Charging Port Assembly Replacement

ID: 117340

Description: This guide was made to help you if you are...

Steps:

  1. Remove the screws with the T2 Torx screwdriver.
  2. Place screws off to the side.
    3. Step image
  3. Once the Torx screws have been removed, use a pry tool and a suction tool to remove the back plate.
  4. Using the T2 Torx screwdriver, remove the six Torx screws on the motherboard.
  5. Make sure to disconnect all other connections from the camera.
    6. Step image Step image
  6. Carefully pry the motherboard assembly from the phone.
  7. The charging port assembly is soldered to the motherboard piece. Remove the port with a soldering iron.
  8. Once you have removed the faulty port, replace it with the new port. Attach the new charging port with the soldering iron.
  9. After installing the new port, repeat the steps in reverse order to reassemble the phone.
  10. How to Solder and Desolder Connections
    11. Step image
Back