Blu Grand M2 Power Button Replacement

ID: 117347

Description: If your BLU Grand M2 phone is not responding...

Steps:

1. Using a T2 Torx Screwdriver, remove the two screws from the bottom edge of the phone.

2. Apply the suction tool to the back panel near the bottom edge.
3. Carefully slide the device pick between the back panel and bottom edge.
4. Insert the opening tool into the gap created by the device pick.
5. While holding the suction tool, use the opening tool to gently pry the back panel off.
6. Be Cautious to not damage the phone display and or the inside components while using the pry tool and suction tool.

7. Take the end of the opening tool and push the old power button out of its socket.
8. Remove the old power button.

9. Place the new BLU Grand M2 power button in the socket.