Siemes Surpresso Compact coffee outlet Replacement

ID: 117509

Description: If the coffee only sprays weakly out of the two...

Steps:

1. To the left and right of the coffee outlet you will find two slots on the underside of the front cover.
2. Insert a spudger in the front edge of this slot and loosen the clips that fasten the front cover.
3. Pull the front cover forwards and off.

4. The image shows the machine after the front cover has been taken off. The four slots where the clips were are easily recognizable.
5. The movable coffee outlet is surrounded by a casing. Place an opening tool in the gap that separates the two halves of the casing.
6. Slide the tool along the gap, until the front casing becomes loose.
7. Remove the front casing.

8. Remove the supply tube with a spudger from the connection. Pay attention to the outer wire spiral.
9. Remove the two Torx T15 screws.
10. Remove the black coffee spout.