Acer One 10 S1003-114M Track Pad Replacement

ID: 122400

Description: This guide will walk you through the steps...

Steps:

1. Open the screen.

2. Remove the screen portion from the keyboard.

3. Turn over the keyboard and use the plastic pry tool to remove the two adhesive backed rubber pads furthest from the hinge.

4. Remove ten total screws from the back cover with a Phillips #1 screwdriver.
5. 8 screws 4.25mm in length with 4.00mm diameter heads.
6. 2 screws 6.00mm in length with 4.00mm diameter heads.

7. Use the plastic opening tool to separate the front and back halves of the keyboard.

8. Lift away the loosened back cover.

9. Use an opening tool to remove/peel off the adhesive tape from the trackpad electrical connector

10. Use an opening tool to flip/pop the switch holding down the electric connector to the keyboard.

11. Use the fine tip tweezers to remove the electrical connector for the trackpad. Pull gently.

12. To free the retainer, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

13. To free the trackpad, remove the 2 mount screws, 3.50mm length and 4.90mm diameter heads, with a Phillips #0 screwdriver.

14. Use a pair of fine tip tweezers to remove the adhesive metallic strap holding the trackpad to the keyboard.

15. Gently remove the trackpad from the keyboard.