Swann Wi-Fi Indoor Security Camera Microphone Replacement

ID: 127809

Description: This repair guide is to replace the microphone...

Steps:

1. Use the Phillips #0 to remove the screw located on the back of the camera above the mount.
2. Slide the mount out from the bottom of the device.

3. Remove the back of the case by placing a iFixit opening tool underneath the edge of the case and prying it up.

4. Carefully remove the back of the case without pulling the cables connected to the motherboard and the speaker on the back of the case.

5. Locate microphone and pull to dislodge from the holder.
6. Disconnect the connector located on the main board to finish disconnecting the microphone.