Dexter 900W Corded Hammer Drill - 900ID2.5 Replacement Power Cable

ID: 135894

Description: This guide will show you how to replace the...

Steps:

1. Before you begin, remember to disconnect the mains plug.

2. Remove the handle from the machine.

3. Using a screwdriver or screwdriver, unscrew and open the device.

4. Lift the switch and unscrew the screws to release the cable.

5. Replace the new power cable and connect the cables to the switch.
6. Replace the switch in its housing.

7. Before closing, check that no cable is blocked and that each part is in its place.
8. Tighten the screws to close the device.

9. Finally replace the handle.