Dexter 900W Hammer Drill - 900ID2.5 Black Button Replacement

ID: 135900

Description: This guide shows you how to replace the black...

Steps:

1. Before you begin, remember to unplug the socket from the power supply.

2. Remove the machine's handle.

3. Using a power drill or a screwdriver, unscrew and open the device.

4. Remove the black button and then replace it with the new one.

5. Before closing, verify that no cables are caught and that each part is seated in its housing.
6. Tighten the screws to close the device.

7. Finally, replace the handle