1999-2006 BMW 3 Series Headlight Bulb Replacement

ID: 139229

Description: Does your 1999-2006 BMW Series 3 headlight no...

Steps:

  1. Prior to beginning the repair, open the the hood of the car and disconnect the battery.
  2. Remove the two bolts on top of the headlight assembly using an 8mm socket wrench.
  3. Step image Step image
  4. Start by placing your flathead screwdriver inside the microfiber towel.
  5. Then, insert the covered flathead screwdriver in the vertical space below the headlight.
  6. Next, push the screwdriver while wiggling it side to side against the small tab in the crack. By doing this action you will separate the trim under the headlight from the fender of the car.
  7. Step image Step image Step image
  8. Slide the headlight assembly out.
  9. Place the microfiber towel on the bumper; set the headlight assembly face down on it.
  10. Step image Step image
  11. Remove the four screws with the Phillips #2 screwdriver.
  12. Next, remove the backing plate to gain access to the headlight bulb.
  13. Step image Step image
  14. Once the backing plate is removed, free the headlight bulb by pushing down on the retaining bracket. Push towards the direction of the red arrow.
  15. Next, lift the retaining bracket and remove the headlight from the assembly.
  16. Step image Step image Step image
  17. Once the headlight bulb is removed from the housing, separate the bulb from the connector by wiggling it out.
  18. Do not grab the glass while attempting to remove the bulb from the connector. Instead grab the metal plate near the connector.
  19. Lastly, insert your new bulb and follow the steps in reverse order to reassemble.
  20. Step image Step image
Back