Kirby G5 Vacuum Belt Replacement

ID: 142336

Description: Sometimes our vacuums seem to leave messes...

Steps:

1. Place the vacuum at an angle most comfortable and easy to access with the bottom facing upwards.

2. Remove the three screws holding the base plate to the body of the vacuum using a flat head screwdriver.
3. Place the plate to the side.

4. Simply slide the roller out of the vacuum.
5. The belt is attached to the roller on either side.

6. Slide the vacuum belt out from beneath the wheel holding it in place.

7. Insert your new belt and pop the roller back into place.

8. Secure the plate once again until it clicks into the made grooves.
9. Secure the three screws until tightened.