Garmin Nüvi 370 Speaker Replacement

ID: 14388

Description: In this guide the repairer replaces the speaker...

Steps:

1. After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

2. Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

3. The motherboard will now freely separate from the back casing; lay it flat next to the housing.

4. Detach blue speaker cable from motherboard.
5. Battery cable is detached in this picture, and it is not required to do so to install a new speaker.

6. Detach speaker from casing and insert new, functional speaker.
7. Battery is removed in the picture and is not required for the installation of a new speaker.