5. Belt Tensioner Assembly

ID: 144814

Description: Make sure you pay attention to the parts. When...

Steps:

1. Insert the Left Tensioner slide into the Left Bottom Tensioner mount.
2. Insert M4 hex head screw through the Left Tensioner slide.
3. Make the bearing assembly with 3x M3 washers and 2x F623ZZ bearings.

4. Insert a M3x18 button head screw to secure the bearing assembly to the tensioner slide.
5. Thread the tensioner knob on to the M4 hex head screw
6. Thread the Left Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely

7. Mount the assembly to the left top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws
8. Tighten the M3x18 button head screws
9. Secure the bottom of the tensioner to the underside of the 2040 with a M5x8 button head screw and M5 T-Nut

10. Insert the Right Tensioner slide into the Right Bottom Tensioner mount.
11. Insert M4 hex head screw through the Right Tensioner slide.
12. Make the bearing assembly with 3x M3 washers and 2x F623ZZ bearings.
13. Insert a M3x18 button head screw to secure the bearing assembly to the tensioner slide.

14. Thread the tensioner knob on to the M4 hex head screw
15. Thread the Right Tensioner Top Plate to the bottom assembly with 2x M3x18 button head screws. Do not tighten completely
16. Mount the assembly to the right top of the frame using 2x M5x8 button head screws, 2x M5 T-Nuts and 2x M6x10 button head screws. Once the plate is straight tighten the screws.
17. Tighten the M3x18 button head screws