HP Pavilion x360 15t-br000 RAM Replacement

ID: 145132

Description: Use this guide to replace the RAM in an HP...

Steps:

1. Remove the covers to access the screws attached to the back cover of the device.
2. Remove six 3mm screws using the Phillips #0 screwdriver.

3. Use a metal spudger to loosen the four corners of the keyboard panel. The corner is circled red as shown in the first image.
4. Disconnect the keyboard panel cables under the upper case.
5. Remove the keyboard panel from the device.

6. Disconnect the battery cable from the device.

7. Remove the seven Phillips #0 4.5 mm screws.
8. Remove the battery from the device.

9. Disconnect the five cable connections to the motherboard.

10. Unscrew the nine 3mm mounting screws on the motherboard using the Phillips #0 screwdriver.

11. Lift the motherboard carefully then remove the motherboard.

12. Turn over motherboard and remove the RAM carefully from motherboard.