Epson VS250 Lamp Replacement

ID: 145484

Description: If your Epson VS250 projector is having image...

Steps:

1. Place the projector on a flat surface.
2. Orient the projector so that the the word "Epson" is facing you.
3. Use Phillips #1 screwdriver to loosen the 10 mm screw on the top right corner of the projector.
4. The screw does not need to come all the way out.

5. Slide the cover to the right and lift the cover up and out to remove.

6. Use a Phillips #1 screwdriver to loosen the two 10 mm screws that hold the lamp in place.
7. The two 10 mm screws do not need to come all the way out. Just ensure they are loose.

8. After loosening both screws, remove the lamp from the projector by pulling it up and out.