General - Repairing Broken Parts

ID: 146857

Description: In this guide, I will show how to repair broken...

Steps:

1. You will need superglue and glass grit with a grain size of 0.05 to 0.5 mm.
2. Glass grit has the advantage of being alkaline, which causes the superglue to cure quickly.

3. If you want to speed up curing, use an activator.

4. Locate the broken area and ensure it is free of dust, dirt, and grease.

5. Apply a small amount of superglue to the break.

6. Sprinkle glass grit onto the adhesive and wait for it to cure. If necessary, spray a little activator to accelerate the curing process.

7. Reapply adhesive.

8. Sprinkle more glass grit. Alternate applying glue, glass grit, and activator until the desired layer thickness is reached.

9. Once the desired layer thickness has been reached and cured, the part can be put under load.