2012 BMW 3 Series Windshield Wiper Replacement

ID: 147552

Description: Use this guide to replace a broken 2004-2013...

Steps:

1. To begin, open the hood and make sure the broken wiper's body is completely positioned on the hood.
2. This is done to prevent scratches from developing throughout the repair process.

3. Use your fingers to pop the cover off that holds the wiper in place.

4. Use a back and forth motion to carefully remove the wiper blade from the wiper arm. and then pull it out.

5. Install the replacement wiper so that the slightly bent angle side faces the vehicle.

6. Check that the screw is aligned with the hole.
7. With a little pressure, slowly slide the new wiper into place.

8. Once it is positioned correctly, lock the cover to keep the blade in place.
9. If you hear a click, you will know you have succeeded.
10. Lower the windshield wiper carefully onto the windshield.

11. Finally, test your wiper blades by spraying water or windshield wiper cleaner over your windshield and turning on the wipers.
12. You are done if they are wiping properly. If they appear to be loose, make sure they are securely attached before driving again.