Lenovo ThinkPad X1 Yoga (6th Gen) Fan Replacement

ID: 149103

Description: Following the steps laid out in this guide will...

Steps:

1. Use a Phillips #1 screwdriver to remove the five 5 mm screws that secure the base panel.
2. Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
3. Lift the base panel up and off of the chassis.

4. Use a Phillips #000 screwdriver to loosen the four 5 mm captive screws.
5. The captive screws will stay attached to the fan as you remove it.

6. Place the pointed tip of a spudger behind the small plastic tab on either side, and "walk" the fan's connector out of its port, alternating between tabs, until the plug disconnects.
7. Lift the fan up and out.