Epson PowerLite S4 Exhaust Fan Replacement

ID: 149114

Description: This guide is to inform you on how to replace...

Steps:

1. With the bottom of the projector facing you, use a Phillips #00 screwdriver to remove the seven screws.

2. Use a Phillips #00 screwdriver to remove one screw on the backside of the projector.
3. Slide the panel off.

4. Lift the top frame from the backside of the projector, with care not to damage any connections.
5. Disconnect the two cables from the motherboard.

6. Use a Phillips #00 screwdriver to remove one screw.
7. Lift the fan and its mount up and out of the projector.

8. Use a Phillips #00 screwdriver to remove the two screws securing the fan to its housing, then gently pull them apart to separate each piece.