Skullcandy Crusher Wireless Headphone USB Connector Replacement

ID: 149288

Description: You will use this guide to replace the USB...

Steps:

1. Take your headphones and hold them upside down for better control with your hands.

2. Grab the ear cushion firmly between your thumb and forefinger with a tight grip.
3. Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

4. Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

5. Remove three 12 mm Phillips #1 screws located underneath the left ear cushion.

6. Slide a plastic opening tool between the plastic frame and speaker assembly of the headphones.
7. Gently pry the speaker away from the frame of the headphones.

8. Separate the headphone speaker assembly from headphone speaker frame.

9. Inspect the USB port and ensure that it is connected correctly. If necessary, desolder the USB port and replace it with the new port.
10. For more information on soldering, please, use this Solder and Desolder Connections guide.