HP EliteBook Folio 1020 G1 Wi-Fi Card Replacement

ID: 149394

Description: If your computer will not connect with the...

Steps:

1. Use a TR8 Torx screwdriver to remove:
2. Six 5.3 mm screws
3. Four 3.3 mm screws

4. Use a nylon spudger to gently pry the lower case up and off.

5. Disconnect the two coaxial cables connected to the card.
6. Be sure to remember which wire is which. It is easy to get these wires mixed up.

7. Use a Phillips #1 screwdriver to unscrew and remove the single 1.8 mm screw that secures the card to the board.

8. Lift the card slightly and then pull away from the port and remove.