JBL Clip 3 Speaker Housing Replacement

ID: 149484

Description: This guide is to help you replace the speaker...

Steps:

1. Insert the iFixit opening tool between the speaker grill and speaker housing and pry around the entire perimeter of the device until the grill releases.
2. A strong adhesive attaches the grill to the housing, and requires some time and patience to break. Use mild heat to loosen the adhesive if necessary.

3. Use a Phillips #1 screwdriver to remove the five 6.3 mm screws around the perimeter.

4. Separate the speaker housing from the rest of the body.
5. This requires minimal force; they are not glued together.

6. Use tweezers to remove the 2 pin and 4 pin connectors from the motherboard.