DeLonghi ECAM/ETAM - Seal replacement (internal components)

ID: 151970

Description: This is a complete guide to seal replacement...

Steps:

  1. Before you begin, you must disconnect the machine from the power source
  2. Remove all loose parts from the machine.
  3. Open the coffee machine housing and disassemble it.
  4. Remove the control panel and the coffee spout.
  5. Remove the upper brew group.
  6. Replace the seals on the upper brew group.
  7. Remove the water heater.
  8. Replace the seals on the water heater.
  9. Reinstall the water heater.
  10. Reinstall the upper brew group.
  11. Reattach the control panel and the coffee spout.
  12. Secure the housing and reassemble it.
  13. Replace the brew unit gaskets.
  14. Insert the brew unit and reattach all loose parts.
Back