HyperX QuadCast S Mute Sensor Replacement

ID: 154786

Description: If your HyperX QuadCast S microphone will not...

Steps:

1. Set the microphone on a flat surface.
2. Pull each of the support bands upwards and off of the notches to release the microphone from its base.
3. There are four support bands in total, but it does not matter which band you choose to take off first.

4. Grab ahold of the tap-to-mute Sensor and pull it upwards in a clockwise motion.
5. Be careful not to damage the cable as you remove the top.
6. Once the tap-to-mute sensor detaches from the microphone, you will hear a small "pop."

7. Gently unplug the cable, and remove the tap to the Tap-To-Mute sensor from the microphone.
8. The square indicates the location of the cable. This is cable is very small and will require a bit of force to be unplugged.