GameSir T4 Pro Battery Replacement

ID: 155032

Description: Use this guide to remove the battery from your...

Steps:

1. Using the Phillips 1 screwdriver, gently turn the screw to the left (repeat this step until all four screws are taken out).

2. Use your iFixit opening tool to break the seam of the back of your controller.
3. Be careful when pulling apart, as the charging port wires are connected to both sides of the controller.

4. Using the plastic spudger, wiggle the connection out of place.

5. Apply a slow, but consistent pull to the old 600 maH battery.
6. Attach new battery onto the pad.