Razer Kraken Ultimate Speaker Replacement

ID: 155365

Description: Should the speakers on you Razer Kraken...

Steps:

1. Grab the ear piece from one of the sides and lightly pull it outwards.
2. Ideally, do not pull the ear piece directly away from the speaker; it may damage the piece.

3. Once you have taken off one side, you can then remove the whole piece by slowly prying the pad away from the headphones.

4. Repeat steps on the other side.

5. Remove the four 10 mm Phillips #00 screws securing the right speaker.
6. Be sure the device is unplugged before attempting to remove any of the screws.

7. Remove the 10 mm Phillips #00 screws securing the left speaker.
8. Note that one of the screws is hidden behind the product information sticker. Use your screw driver to punch a hole in the sticker.

9. To fully detach the speakers cut the wires as close as possible to the connection point, leaving plenty of room to solder the new speaker on.