Marshall Emberton Button Replacement

ID: 155564

Description: The main button on top of the Marshall Emberton...

Steps:

  1. Remove the rubber casing from the speaker by peeling it off using your nails.
    2. Step image
  2. Use a TR9 screwdriver to remove the eight 1 cm screws located on top of the speaker.
    3. Step image
  3. Once all the screws are off, you must pry the plastic piece off using any tool capable of sliding into the crevice. Then easily pop the piece out.
    4. Step image
  4. On the back side of the plastic piece, there is a circuit which is shown in the picture. Use a TR9 screwdriver to remove two 1.2 cm screws to detach the circuit from the plastic housing.
    5. Step image
  5. Once the circuit is removed, you may gently pop the button off and easily replace it with a new one.
    6. Step image
Back