Wacom Intuos4 Casing Replacement
ID: 155663
Description: Use this guide to replace the casing on a Wacom...
Steps:
- Flip device on its back and remove all fourteen 7.1 mm screws using a Phillips #1 screwdriver.
- There is a single screw located under each of the rubber leg pieces. Use a shimmy tool to remove these pieces to access the screws.
- Lift the screen's foam backing connecting the motherboard/drawing board to the two smaller express-key boards, placing it onto the motherboard.
- Separate the outer casing from the rest of the tablet.
