2014 Subaru Impreza Hatchback Brake light Replacement

ID: 157579

Description: If your 2014 Subaru Impreza Hatchback's brake...

Steps:

1. Turn off car engine

2. Open the trunk of the car.

3. Unscrew the both the 2 cm Phillips #3 screws encircled in the image shown with a Phillips #3 screw driver.
4. Unscrewing them will allow you to take out the brake light.

5. Unscrew both the 2 cm Phillips #3 screws by turning the screwdriver counterclockwise.

6. Gently pull the rear light straight back.

7. Upon opening the brake light, you should see three bulbs in total.
8. The brake light is the one on the bottom.

9. To remove the brake light, twist the light bulb socket counterclockwise.
10. The bulb should come out as shown in the second image.

11. To remove the bulb, gently pull out the bulb from its connector.

12. Gently insert the new bulb into the connector.
13. Carefully insert the bulb, as the bulb is made of glass it is susceptible to breaking and cutting you if a lot of force is used to insert it in the connector.

14. Reinsert the bulb back into its initial position.
15. Gently twist the bulb clockwise to further tighten the bulb.

16. Gently push the rear light cover back into its initial place.

17. Reattach both the 2 cm Phillips #3 screws back into their place by screwing them clockwise with your Phillips #3 screwdriver.