Brewologist Turbo Milk Frother Connector Between Electric Motor and Whisk Replacement

ID: 158425

Description:

Steps:

1. AliExpress is a good source if you don't mind the long shipping time.

2. Amazon was a good source.

3. Tighten the hex head screws evenly on both sides.

4. With the hex head screws removed, hold the coupler with pliers when drilling. Drill the 3mm coupler end with a 3.1mm drill bit past the hex screw holes. Attach the wisk and tighten the hex head screws evenly on both sides.

5. All done.