PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

ID: 160165

Description: Follow this guide to replace the power supply...

Steps:

  1. Turn off your PlayStation 2 and remove the disc and Memory Card.
  2. Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).
    3. Step image
  3. Locate the six covers.
  4. Two are located underneath the feet.
  5. One cover is located underneath the Void sticker.
    6. Step image
  6. Remove the Void sticker with a Spudger and some cleaning alcohol
  7. Removing the Void sticker will void the warranty of your device!
  8. Some versions of that console maybe don’t have the sticker or it’s relocated.
    9. Step image
  9. Remove the covers by using either a Spudger, Opening Picks or your fingernail.
    10. Step image Step image
  10. Remove the six Phillips #1 screws with a screwdriver.
  11. The screws on the right are a bit deeper inside the shell as like the rest but are the same size.
    12. Step image
  12. Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.
  13. Separate the two halves.
    14. Step image Step image
  14. Remove the Phillips screw from the power supply.
    15. Step image
  15. Remove the power supply connector from the motherboard.
  16. To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.
    17. Step image
  17. Lift the power supply straight up and out of the PS2.
Back