Neato BOTVAC CONNECTED Filter Replacement

ID: 160487

Description: In this guide you will be able to replace the...

Steps:

1. Place the top of the Neato Botvac Connected against a flat surface.

2. Remove the two 5.5 mm screws with a Phillips #2 screwdriver.

3. Using the spudger, remove the panel covering the battery.

4. Gently remove the connecting wires attached to the battery.
5. The wires are attached to the vacuum through a clip.

6. Using the spudger, gently remove the battery from the device.

7. Flip the cleaner around and locate the front panel.

8. Gently remove the front panel by opening it with a spudger.

9. Use the spudger to gently remove the paper filter.