Analogue Pocket Battery Shell Replacement

ID: 163328

Description: Use this guide to remove or replace the battery...

Steps:

1. Unplug all cables and fully power off your device.
2. Working on your device requires laying it screen-side down. To prevent damage, lay it on a soft surface such as a towel.

3. Use a T6 Torx screwdriver to remove the four 13.4 mm‑long screws securing the battery shell.

4. Lift the bottom edge of the battery shell to unhook its tabs.
5. Remove the battery shell.
6. During reassembly, hook the tabs on the top edge of the battery shell into their slots in the rear shell before securing it in place.