BENZING M1 Battery Service

ID: 163492

Description:

Steps:

  1. Cut the security label with a utility knife.
    2. Step image
  2. Remove the Allen screws, the Plexiglas panel, and the front foil.
  3. Open the housing
  4. Remove screws
  5. Remove assembly from upper part of housing
  6. Desolder the battery
  7. Clean the solder pads
  8. Insert new battery and solder in place
  9. Check voltage (~3V)
  10. If there is no connection, solder the cable in place.
  11. Screw the assembly into the new upper part of the housing.
  12. Assemble the housing (pay attention to the pins)
  13. Update to the latest firmware on the device using the download program.
  14. Set a new service date in the service program
  15. Set the time via the ClubSystem
  16. After approx. 24 hours check the time.
  17. Check the time after approx. 24 hours. If the check is successful, activate the tamper protection with the soldering iron and stick a new security label onto the housing.
Back