2006 Dodge RAM Turn Signal Bulb Replacement

ID: 167070

Description: If the blinker bulb on your Dodge Ram 2006 is...

Steps:

1. Remove the two screws securing the light to the truck using an Allen wrench.

2. Pull the light casing out of the socket.
3. The wires exposed at the back of the light case are dangerous to touch as they are exposed electrical wires. Do not interact with them.

4. Remove the four screws from the light case.

5. Remove the light case from the light bulb holders.

6. Replace the light bulb by gently pulling the original light bulb out.
7. Replace the lightbulb with a new one.

8. Reattach the lightbulbs to the light casing and put the 4 screws back in.
9. Pop the light casing back into place by making sure the two pointed ends go into the holes.
10. Replace the two screws that secure the light to the truck using an Allen wrench.