LG Refrigerator Freezer Light Replacement

ID: 167749

Description: Use this guide to remove the freezer light on...

Steps:

1. Unplug your refrigerator before you begin your repair.
2. If you are testing or repairing the following items, you may also need to shut off and disconnect the water supply:
3. Condenser fan motor
4. Compressor motor and thermal overload device
5. Water supply valve assembly

6. Pull open the freezer door fully.

7. Lift and remove the upper pull-out drawer.
8. Lift and remove the main drawer bin.

9. Use your finger or a flat-blade screwdriver to depress the two locking tabs on the right drawer rail cover.
10. Lift the cover off of the rail and remove it.
11. Repeat this procedure for the left drawer rail cover.

12. The drawer rail covers can be tricky to reinstall. Follow these steps to reinstall them:
13. Hold the drawer rail cover flush against the side of the drawer rail.
14. You should feel the locking tabs protruding.
15. Push the rail cover straight downward to install. It should click into place.

16. Use a Phillips screwdriver to remove the screw securing the drawer to each of the drawer slides.

17. Lift the front of the drawer up.
18. Pull the drawer toward you to release the drawer from the drawer slides.
19. Remove the freezer drawer.

20. Use a Phillips screwdriver to remove the screw(s) securing the freezer light.
21. Lower the front edge of the freezer light to access its connector.

22. Squeeze the freezer light connector and pull it straight off to disconnect it.
23. Remove the freezer light.