Black and Decker DCM100R Heating Element Replacement

ID: 168114

Description: This guide will show you how to replace the...

Steps:

1. Turn the coffee maker on its side.
2. Remove the four 6 mm Phillips #2 that secure the baseplate.

3. Insert the jimmy at the back of the panel and slide it around to the front.

4. Apply pressure to the backside of the panel until it releases.
5. Remove the plate.

6. Remove the two 10 mm Phillips #2 screws securing the metal support brace.
7. Remove the brace and set aside.

8. Pull back the tubing and wiring to reveal the hot plate.
9. To hold these out of your way, you can use the Nylon Tipped Tweezers to pin them back to the back panel.

10. Use a Phillips #2 screwdriver to remove the five 8 mm screws that secure the mounting bracket and hot plate.

11. Use a pair of pliers to gently pull the mounting bracket out of place.

12. Remove the hot plate from the mounting bracket.
13. Remove the O-ring from the hot plate.