ASUS ROG Zephyrus M15GU205L Display Cable Replacement

ID: 168186

Description: If your screen is glitching or the screen goes...

Steps:

1. Remove fifteen 10 mm screws from the bottom cover using a Phillips #0 screwdriver.

2. Use a plastic opening tool to separate the back cover from the laptop.
3. It is recommended that you separate the laptop cover from the side and run the tool along the edge of the cover to open it.
4. Be careful not to damage the cover when removing it from the laptop.

5. Remove six 4.8 mm screws that secure the battery using a Phillips #00 screwdriver.

6. Disconnect the 8-pin battery that secures the battery to the motherboard.
7. Use the nylon tipped reverse tweezers to squeeze the edges, then pull out the connector.

8. Remove the battery from the computer.

9. Once the back has been removed, locate this connection cable.
10. Check to see if the connector is in the pin slot; if not, locate the connector.

11. If the connection is loose, connect the pins into the slot.
12. Once the connector is connected, do these steps in reverse.