Philips Senseo II 7810 Coffee Maker - Removing the Back Cover

ID: 170959

Description:

Steps:

1. Remove the detachable components of the coffee maker:
2. unplug the product;
3. empty the water container and remove it from the coffee machine;
4. remove the cup tray and drip tray;
5. remove the pod holder and coffee outflow unit.
6. Placing parts in a sink is easiest when disassembling.

7. Remove outflow valve by putting a flathead screwdriver in the gaps and use this as a lever.
8. Pull gently while applying force.

9. Remove back panel by:
10. inserting (flathead) screwdriver in the top and pressing this against the snap-fit;
11. pressing screwdriver on left side against the snap-fit simultaneously;
12. rotating back panel whilst pressing against the snap-fits to loosen the panel until it is no longer connected on that side;
13. pressing screwdriver on right side against the snap-fit and removing back panel altogether.
14. Expect difficulty with pulling, more hands may be required.