Milwaukee Reciprocating Saw 6538-21-B36B (2010) Power Cord Replacement

ID: 171656

Description: You can use this guide to replace a damaged...

Steps:

1. Use a TR20 Torx screwdriver to remove the five 15.9 mm screws that secure the two halves of the handle together.
2. Use a TR20 Torx screwdriver to remove the two 25.4 mm screws near the motor housing.

3. Use a TR20 Torx screwdriver to remove the single 15.9 mm screw that secures the trigger mechanism.
4. Gently lift the trigger mechanism from the handle casing and unseat the power cord wires from their slotted position.

5. Use light pressure to pull the white and black wires from the trigger mechanism.

6. Notice the small windows on the side of the trigger mechanism; this is where the wires attach.
7. Apply pressure to open these windows with a small flathead screwdriver; this is to ensure the wires are securely in place.
8. Insert the white and black wires from the replacement cord in the sockets perpendicular to the windows.