GameSir T4 Pro Vibration Motor Replacement

ID: 171836

Description: This guide goes over how to replace the...

Steps:

  1. Remove the following screws on the back case using a Phillips screwdriver:
  2. Two 9.2 mm
  3. Two 11.3 mm
  4. Insert an opening tool in the seam between the front and back case.
  5. Pry around the perimeter until the back case releases.
    6. Step image Step image Step image
  6. Use tweezers to pull the right vibration motor connector directly out of its motherboard port.
  7. Do not pull on the wires to disconnect the cable.
  8. Repeat on the left vibration motor if necessary.
    9. Step image
  9. Remove the right vibration motor from its housing.
  10. Repeat on the left side if necessary.
    11. Step image
Back