GameSir T4 Pro Bumper Replacement

ID: 171838

Description: This guide goes over how to replace the...

Steps:

1. Remove the following screws on the back case using a Phillips screwdriver:
2. Two 9.2 mm
3. Two 11.3 mm
4. Insert an opening tool in the seam between the front and back case.
5. Pry around the perimeter until the back case releases.

6. Disconnect the USB-C charger with tweezers.
7. Do not pull on the wires.

8. Remove the two 7.1 mm Phillips screws that secure the shoulder buttons.

9. Gently lift up the plastic piece holding the bumper and trigger.
10. Remove the bumper.