Logitech Gamepad F310 D-Pad Replacement

ID: 171959

Description: Use this guide to replace a damaged or...

Steps:

1. Use a Phillips #1 screwdriver to remove all seven 3 mm screws that secure the rear case.

2. Press along the seams of the controller and gently pull the front and rear case apart.
3. If necessary, use an opening tool to help pry the front and rear case apart.
4. Make sure to open the controller with the front facing down so that the buttons do not fall out.

5. Separate the front and rear case.
6. There are two side panels on the controller that come apart as well. When putting them back together, they slot into place on the sides of the controller.

7. Remove the silver 3 mm screw in the middle of the D-pad with a Phillips #1 screwdriver.
8. Remove the D-pad
9. There are 4 buttons that go in the four slots of the D-pad, a spring on one side, and the D-Pad on the other side.