PowerA Spectra Infinity Enhanced D-pad Replacement

ID: 172075

Description: If your PowerA Spectra Infinity Enhanced (model...

Steps:

1. Flip the controller so the back is facing up.

2. Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

3. Unlock the trigger locks before removing the backplate.
4. This will make taking the plate off easier.
5. Use your fingers and carefully remove the backplate.

6. Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

7. Use your hand to separate the motherboard from the face plate.

8. Remove the D-pad.
9. The buttons will fall out easily if you flip the faceplate over. You can raise the faceplate off the surface and push the D-Pad out from underneath.