How to Fix Bent Eyeglasses

ID: 173932

Description: Since eyeglasses are crucial instruments and...

Steps:

1. Hold the temple and the end-piece of the eyeglasses together so that the screw-holes are aligned.
2. On a flat surface, carefully place the 1.4 mm slotted screw in the screw-hole.

3. Use an eyeglasses screwdriver to screw the two pieces back together.

4. On medium heat, blow a hairdryer onto the bent part of the glasses in order to make it more malleable.
5. Using too much heat or heating the glasses for too long can cause permanent damage to the lenses or frames.

6. Gently bend the heated up piece until it appears straight again.
7. Bend the glasses lightly as not to snap or disfigure them further.

8. Place the glasses on a flat surface. All four bottom points should be touching the ground.